Skip to content

Spray foam removal in Bath

Rigid foam sprayed under old tiles or slates blocks water, traps damp and stops you from seeing what the roof underneath is really doing. When it comes time to repair or re-tile, that foam has to come off first. SB Roofing removes it safely and leaves the roof ready for proper work.

  • Free, no-obligation quote
  • Fully insured
  • Roof and garden left tidy
Foam removal underway on a Bath roof

Why it matters

Why Bath roofs end up with foam underneath

Spray foam was sold as a quick insulation fix in the 1990s and 2000s. It was sprayed directly under existing tiles or slates. It sounded good on paper but created real problems.

Water gets trapped and turns to damp

Foam doesn't breathe. If a tile slips or flashing fails, water seeps in behind the foam and has nowhere to go. It stays there, soaking the timbers and breeding mould inside the loft and walls. By the time you notice, there is already damage.

You cannot see what is underneath

The foam sits on top of the actual roof structure — battens, rafters, felt, any existing damage. When a surveyor or roofer looks at the roof, they cannot assess what is really going on under there.

It stops proper repairs

Once you decide the roof needs work — whether tiles, leadwork, guttering or anything else — that foam is in the way. It has to come off before the roofer can do anything else. It is an extra job and an extra cost.

Resale and mortgage problems

Surveyors flag spray foam. Some lenders hesitate to approve mortgages on homes with it, and buyers ask questions. Getting it off before you sell saves headaches later.

Clearing spray foam from under roof tiles

★★★★★

"Fantastic guys, very helpful, polite & considerate. Great work, very tidy, nothing is too much trouble."

Google review

How we do it

How spray foam removal works

  1. Inspect and plan

    We get into the loft and check the foam — how much of it, what state it is in, and what the roof underneath looks like. We tell you straight how long it will take and what we find as we go.

  2. Remove the foam safely

    Foam is scraped, chiselled and lifted off the roof deck carefully to avoid damaging battens, rafters and the existing tiles. Dust control and proper disposal follow building waste guidelines.

  3. Assess the roof structure

    Once the foam is gone, we can see the battens, felt, rafters and any damage that was hidden. If you are going to repair or re-tile, we now know exactly what is needed.

  4. Clear up completely

    All foam waste is removed. The loft is swept clean, the garden is tidied, and the roof is left ready for the next phase of work or for the tiles to be re-laid as they are.

Cost factors

What affects the price of foam removal

Foam removal on its own is simpler than a full re-tile, but several things change the price. We cover them when we visit.

How much foam is there

Some roofs have a thin coat; others are coated thickly. More foam means more time chiselling and lifting it away.

Roof area and pitch

A large terraced roof or a steep pitch takes longer and means more time working safely at height with safety harnesses.

What the foam is bonded to

If the foam is glued hard to tiles or felt, it comes off slowly. Sometimes tiles crack or felt tears as the foam is removed — we tell you if that happens and what it means for the next step.

What comes after

If you are removing foam only to get a clear look before deciding on repairs, it is one job. If you are planning to re-tile, re-lead or repair straight after, we can often schedule it back-to-back and move materials in one go.

Loft access and working space

Some Bath lofts are cramped or have low headroom. We work in them all the time, but tight access means the job takes a bit longer.

Waste disposal

All foam is taken away as building waste. We handle that cost and include it in the quote.

On the day

What to expect during removal

  • Loft access

    We will need to come and go through your loft hatch. If it is awkward or the hatch is small, we work round it and pass tools and waste through carefully. We always prop the hatch open safely.

  • Dust and debris

    Foam removal creates dust and chips. We use dust sheets in the loft to catch it and clean up thoroughly once the work is done. It is not pleasant but it is temporary.

  • Timing and weather

    Removal takes a day or two depending on the roof size and foam amount. If you are planning to re-tile or repair straight after, we schedule it to suit the weather forecast so tiles can be fixed when it is dry.

  • What comes next

    Once the foam is off, tell Scott if you want him to recommend repairs or if you would rather get your own surveyor in. Either way, the roof is now visible and honest.

Questions

Spray foam removal questions we hear

Anything else you want to know? Get in touch and Scott will answer it straight.

Is spray foam dangerous to remove?

SB Roofing removes it safely. The foam itself is not toxic once dry, but it creates dust when chiselled off. We use dust control and dispose of it as building waste. If you have concerns about the foam's age or type, tell Scott when you call and he will check it over first.

Do you have to remove spray foam before re-tiling?

Yes. We cannot see what the roof underneath looks like, cannot assess damage to battens and felt, and cannot fix flashings or leadwork while foam is in place. It has to come off first. That said, if the roof has only minor leaks and is structurally sound, you can sometimes leave foam in place for a few more years — we will tell you honestly when we visit.

How long does spray foam removal take?

It depends on the roof size and how thickly the foam is applied. A small terrace might take a day; a larger Victorian roof or one with heavy foam could take two or three days. We will tell you during the quote how long it should take.

Can you remove foam from just part of the roof?

Yes. Some roofs have foam everywhere, others only on the back or one side. We can remove it from the areas causing problems — usually where water is getting in or where you are planning repairs — and leave the rest if you prefer.

What happens to the tiles once the foam is off?

If the tiles are in good condition and you want to keep them, they stay in place. If they are worn, cracked or slipping, we recommend re-laying them on new battens and felt to current standards. We will give you the options once we can see the roof clearly.

Will removing foam affect my mortgage or house sale?

Many lenders and surveyors flag spray foam on mortgage valuations, and some buyers ask questions. Getting it off before you sell or remortgage removes that uncertainty. We handle the whole job so you have a clear, honest roof underneath.

Got spray foam under your tiles?

Scott will come out, check what is there and explain what needs doing. You get a free quote and a straight answer about whether it needs to come off now or whether the roof can be managed as it is.