Skip to content

Fiberglass slates in Bath

A roof that looks like slate but costs less and weighs far less than the real thing. SB Roofing fits fiberglass slates on houses where traditional slate isn't practical or where the original covering has had its day.

On every fiberglass job

  • Free roof assessment and design advice
  • Fully insured, VAT-registered Ltd company
  • Lightweight material — no need for roof reinforcement
  • All site and garden areas left clean and tidy
What it covers

From a small repair to a full re-roof in fiberglass

Fiberglass slates are a composite material — resin mixed with glass fiber — that replicates the look of natural slate without the weight or the price. They're stronger than clay tiles, don't degrade in UV light the way some early polymers did, and they're easier to cut and lay than the real stone. We use them on new roofs, as a like-for-like replacement where slate has failed, and on buildings where the original covering is shot but traditional slate isn't in the budget.

Single slate replacement

One or two slates cracked or slipped. Fiberglass can be cut and shaped to match, and the repair stays invisible.

Section re-slating

Storm damage or age has left part of the roof exposed. We re-cover that area, blending new slates to match the existing.

Full roof conversion

The original covering — whether slate, tiles or felt — is off and replaced with fiberglass slates that last decades and look right.

Valleys and ridges

Fiberglass can be used for all the tricky parts — valleys, hips and verges — so the whole roof is one unified system.

Difficult pitches and angles

Fiberglass is flexible enough for unusual roof shapes and steep pitches where traditional slate becomes risky to handle.

Dormer and extension roofs

Small roof areas, complex junctions and corner details finish cleanly in fiberglass without waste or awkward cuts.

Signs your roof needs replacing

When fiberglass slates make sense

Fiberglass is the right choice when traditional slate is too costly, the roof has failed and needs recovery, or when weight is a constraint. These are the jobs we see most often.

Slate that's beyond repair

Too many broken slates to patch economically, or the slates that remain are too soft to hold nails.

A roof that's sagging

Heavy slate on old timbers can be a risk. Lightweight fiberglass sits on the same structure and no reinforcement is needed.

Leaks that keep returning

Once the slates are off, you can see what's rotted underneath. Fiberglass goes on fresh battens and new underlay.

Missing or damaged slates scattered across the roof

Piecemeal repairs add up. A full covering in fiberglass costs less than patching the problem ten times over.

Valleys and junctions that are difficult to seal

Fiberglass valleys and hips are simpler to form and more reliable than multiple slate pieces at angles.

Age and weathering

Slate naturally weathers and splits over decades. At 60+ years, a full re-cover is more cost-effective than ongoing repairs.

Building work or extensions

A new extension roof or a loft conversion gives you a chance to rework the whole roof in a uniform material.

Budget constraints

Fiberglass delivers the slate look and longevity at a fraction of the cost of reclaimed or new natural slate.

Inspection from safe angles. Use binoculars from the ground or view the loft with a torch. If you're unsure, we'll do a free look and advise what suits your roof and your budget.

Materials and grades

Understanding fiberglass slate options

Not all fiberglass products are the same. The best ones use reinforced resin with UV-stable pigments that hold their colour for decades. We choose materials with a proven track record and a lifespan that matches your investment.

Standard choice

Premium resin slates

Fiberglass reinforced with pigment throughout, not just surface coating. Colour stays true and the material resists impact and weathering.

Heritage look

Textured finishes

Surfaces that mimic the slight irregularity of natural slate, so repairs blend into an old roof without standing out.

Durability

Heavy-duty composite

Extra resin and reinforcement for roofs exposed to high winds or extreme weather, with a guarantee of 50+ years.

What happens under the slates

Underlay

Breathable membrane lets moisture escape from the loft, essential on modern roofs. We fit the grade to suit your roof pitch and exposure.

Battens

Treated timber set at the gauge for fiberglass slates, fixed firmly through to the rafters to handle the material's modest weight.

Ridges and junctions

Fiberglass ridges, verges and valleys, or a combination with lead flashing where traditional details are needed.

Fiberglass slate roof installed by SB Roofing
What's included

What you get with a fiberglass slate quote

A written quote that covers every part of the job, so there are no surprises when we start.

  • Free roof inspection and design plan with no obligation
  • Safe access, with scaffold or mobile towers where needed
  • Existing covering removed and disposed of
  • All timbers checked; rotten wood replaced
  • Breathable underlay and treated battens to current standards
  • Premium fiberglass slates in your choice of colour and finish
  • Ridges, hips and valleys in matching fiberglass or lead
  • All flashings checked and dressed
  • Gutters cleared of debris from the work
  • Your garden, driveway and site left clean
How the job is done

Fitting a fiberglass slate roof, step by step

Fiberglass is lighter and faster to lay than slate, but the care is the same. Every step is planned, and the roof is never left exposed to the weather.

01

Survey and specification

We look at the roof, the structure underneath and the gutters. You choose the colour and finish, and we tell you what the roof will look like when it's done.

02

Written quote and schedule

A detailed quote that breaks down materials, labour and timescales. We'll talk through options and answer questions before you commit.

03

Set up safe access

Scaffold or towers are erected, the site is covered to protect your garden and paths, and the gutters are cleared ready for work.

04

Strip and inspect

The old covering comes off in manageable sections. As we go, we check the battens and timbers for rot and repair any defects.

05

New substrate and battens

Fresh breathable underlay and treated battens are fixed at the correct gauge. No shortcuts, and nothing is nailed to rotten wood.

06

Lay the slates

Fiberglass slates are fixed individually at the proper lap and gauge. Valleys, hips and verges are formed from matching material or lead.

07

Ridge, flashing and trim

Ridges are bedded, flashings around chimneys and walls are dressed and sealed, and all junctions are watertight.

08

Final check and clear up

Gutters are cleared, the site is walked and debris removed. We show you what's been done and answer any questions.

Standards and regulations

What a fiberglass roof must meet

  • British Standard BS 5534Sets out the installation method for slated roofs, including spacing, lap and fixing. Fiberglass must follow the same standards as natural slate.
  • Building RegulationsA full re-cover normally requires Building Regulations approval because the roof's thermal performance and ventilation must meet current requirements.
  • Planning and conservationIn a conservation area, changing a slate roof's appearance may need planning permission. Fiberglass is accepted in most cases, but check with your local council first.
  • Wind resistanceThe fixing method is critical in exposed areas. We choose nails and clips appropriate to the site's wind exposure and pitch.

We handle Building Regulations applications. Ask us before you commit if your roof will need approval.

What affects the price

Why fiberglass roof quotes differ

  • Roof size and pitchLarger roofs and steeper pitches cost more in materials and time, plus more safety equipment.
  • Slate grade and colourPremium finishes and bespoke colours carry a small premium. Standard grey and black are the most economical.
  • Structural repairsRotten timber discovered under the slates adds cost. We price that honestly once we've stripped the roof.
  • Valleys, hips and ridgesComplex roof shapes and many junctions mean more fitting time and bespoke cuts.
  • Access and scaffoldingTerraced houses, narrow sites and tall buildings need more set-up and safety measures.

We don't guess — a proper look is free, and the quote reflects exactly what your roof needs.

Aftercare

How to look after your fiberglass slates

Fiberglass is virtually maintenance-free. A few simple habits will help it look and perform for decades.

Keep gutters clear

Leaves and debris block water flow and cause overflow, which soaks the edge of the roof.

Gentle moss removal

Brush off moss or treat it with a low-pressure wash. Never use a pressure washer on fiberglass — it will damage the surface.

Check after storms

A quick look from the ground after high winds will spot any shifted slates before they cause damage.

Ventilate the loft

Keep eaves vents and ridge vents clear so air flows through the roof. This prevents condensation and keeps timbers dry.

Colour fading is normal

Fiberglass slates are UV-stable, but subtle fading over 20–30 years is natural and doesn't affect performance.

Often fitted alongside

Roofing work that complements fiberglass slates

A roof is more than just the covering. These are the jobs that often go hand-in-hand with a slate or slate-look roof.

Leadwork

Lead valleys, chimney flashings and wall abutments form the watertight junctions that stop leaks starting.

Find out more →

Fascia & Guttering

New gutters and fascias channel water away cleanly and protect the timbers below the roof.

Find out more →

Roof Tiling

Some older roofs work better with traditional tiles or slate. We'll advise which is best for yours.

Find out more →
Questions answered

Fiberglass slates, explained

How long do fiberglass slates last?

Premium fiberglass slates last 50+ years with minimal maintenance. The material doesn't degrade in UV light the way early polymers did, and it's not affected by frost or moisture the way natural slate can be. We fit slates with a proven track record so you get genuine longevity.

Can you repair a few broken fiberglass slates without replacing the whole roof?

Yes. Individual slates can be unclipped and replaced. Fiberglass can be cut to size on site, so the repair looks seamless. If you have many broken slates scattered across the roof, a full recovery often costs less than patching repeatedly.

Will a fiberglass roof need Building Regulations approval?

A full re-cover usually needs Building Regulations approval because the roof's thermal performance and ventilation must meet current standards. A repair or replacement of less than 25% of the roof typically doesn't. We handle the application for you and advise before you commit.

Is fiberglass heavy enough to need roof reinforcement?

No. Fiberglass slates are lightweight — roughly half the weight of natural slate. They fit on existing rafters and timbers without reinforcement, which keeps costs down and means old roofs can be resheeted without structural work.

How does fiberglass compare to real slate in a conservation area?

Fiberglass slates are accepted in most conservation areas because they look like slate and perform well. Some conservation officers have restrictions on appearance, so check with your local council before ordering. We've fitted them on dozens of period properties in Bath and they blend perfectly.

Can you match fiberglass slates to my existing roof?

Fiberglass comes in many colours and finishes, including textured surfaces that mimic natural slate's irregularity. We can usually find a match close enough that repairs and repairs blend in. If the entire roof is being replaced, we choose a colour that suits your property.

Start with a free roof survey

Send Scott photos of your roof or book a free visit. We'll tell you honestly whether fiberglass slates are the right choice and what the job will cost.

01225 123456

Get in touch

The fastest way is WhatsApp with photos, but a call or the contact page work just as well.

Message on WhatsApp Request a free quote Fiberglass slates in Bath